Skip to content

New construction and completed shingled homes on Cape Cod, rated by New England HERS Raters.

RESNET® Certified HERS Rater · Cape Cod & Greater Boston

HERS Ratings and Energy Code Compliance, Made Simple

Helping homeowners, builders, architects and contractors navigate Massachusetts energy codes with accurate modeling, responsive service and reliable field testing.

RESNET® Certified Rater
Mass Save® Program Support
Reports in 24-48 Hours
Where Projects Get Stuck

Three codes. 351 towns. One of them applies to you.

Massachusetts towns each enforce the Base, Stretch or Specialized Energy Code, and the requirements shift again by project type and permit date. Almost every problem below starts the same way — the compliance path was settled late, or assumed.

The Wrong Code Assumed

Rough-In Testing Missed

Drywall Closed Too Early

Incentive Window Passed

Blower door test set up in the front door of a new home
24-48h
Report turnaround
How We Work

From preliminary model to Certificate of Occupancy

New England HERS Raters provides residential energy-rating and building-performance services for new construction, renovations, additions and accessory dwelling units. We identify issues early, explain the requirements in practical terms, and keep the project moving toward permit approval and closeout.

  • Certified HERS® rating and energy-modeling services
  • Clear guidance from design through final inspection
  • Fast communication with owners, builders and project teams
  • Practical recommendations focused on compliance, performance and cost
  • Serving Cape Cod, Greater Boston and surrounding communities
See All Services
What We Do

Everything the code asks for, from one rater

From the permit set through the final test, one point of contact for every piece of energy code verification your project needs in Massachusetts.

HERS® Ratings & Energy Modeling

HERS® Ratings & Energy Modeling

Approved modeling software and verified field data produce the certified Index score your building department needs.

New Construction Additions ADUs Multifamily
Blower Door Testing

Blower Door Testing

A calibrated fan measures how much air moves through the envelope — confirming compliance and sizing ventilation.

Air Leakage Pre-Drywall Check Final Verification
Duct Leakage Testing

Duct Leakage Testing

Rough-in and final testing that verifies conditioned air actually reaches the living space instead of the attic.

Rough-In Final Code Documentation
Ventilation Verification

Ventilation Verification

A tight home needs planned fresh air. We review the strategy and verify installed airflow where code requires it.

ERV / HRV Airflow Testing Indoor Air Quality
REScheck Reports

REScheck Reports

Prescriptive energy-code documentation for the permit set — after we confirm REScheck is accepted for your project.

Envelope Review Permit Support Assembly Details
Mass Save® Program Support

Mass Save® Program Support

Eligibility review, enrollment, modeling and the inspections the program requires to release an incentive.

Eligibility Enrollment Documentation
Our Process

Six stages, from plans to certificate

Contact us before construction begins whenever possible. Early involvement gives the project team more options and prevents corrections that get expensive once the walls are closed.

  1. Plan Review & Preliminary Model

    We review the plans and specifications, then build an energy model to evaluate the proposed home and identify the compliance path your town requires.

  2. Recommendations & Coordination

    You get a clear list of what is missing or needs to change. We coordinate directly with the owner, builder, architect, HVAC and insulation teams.

  3. Rough Duct Testing

    When required, duct leakage is tested at rough-in — while the ductwork is still reachable and a fix costs an afternoon instead of a demolition.

  4. Insulation Inspection

    We inspect insulation, air sealing and the envelope details before drywall goes up. This is the last moment corrections are cheap.

  5. Final Testing

    Near completion we run the blower door, final duct testing where applicable, and verify ventilation airflow.

  6. Final Certification

    Once the home passes and documentation is complete, we finalize the rating and issue the certificate your closeout depends on.

Who You Are Working With

Diego Miranda

Massachusetts runs three energy codes at once, and the requirements change depending on which one your town adopted. Knowing that difference before the foundation goes in is what separates a smooth job from an expensive one.

We work directly with builders, general contractors, architects and insulation crews across the state, from base code towns to the sixty municipalities on the Specialized Code. Small enough to answer the phone, certified to sign the report.

RESNET
Certified Rater
Stretch
+ Specialized Code
24-48h
Report Turnaround
Mass Save
Rebate Support
More About Us
Diego Miranda, Owner & RESNET® Certified HERS Rater

Diego Miranda

Owner & RESNET® Certified HERS Rater

Mass Save Rebates

The incentive is still there. Until it isn’t.

Massachusetts pays builders for going past code, and the program also helps cover the cost of working with a HERS rater. What catches projects out is not the amount — it is that enrollment closes partway through the build, long before anyone is thinking about paperwork.

Why Timing Decides This
Not Enrolled
$0
Full rating cost on you
Enrolled
$275 - $7,000
Per unit, plus rater cost support
Must be enrolled by the midpoint inspection
Incentive amounts depend on the utility sponsor, project type, energy savings, equipment and electrification level, and program rules change. Reviewed August 2026 against Mass Save. Every project should be reviewed individually before construction begins.
How Incentives Work
High performance new home in Massachusetts
Enroll by the midpoint inspection
After that the options narrow sharply
Who We Work With

Four people care about that report. We answer to all of them.

A HERS rating touches the builder who pays, the architect who specified the path, the trades who have to hit the number and the owner who wants the house.

Builders & General Contractors

You need the inspection to happen when you say it will and the report to land before the closing. We schedule around your drywall crew, not the other way around, and we flag what is going to fail while it is still cheap to fix.

Repeat Accounts

Architects & Designers

The compliance path gets decided at design, not at final testing. We model the target early so you know whether the project clears the HERS threshold before the permit set goes out the door.

Pre-Permit

Insulation & HVAC Contractors

You get blamed when the blower door number comes back high. We walk the job before the walls close, point at the rim joists and the top plates, and give you the chance to fix it before it is a callback.

Trade Partners

Homeowners Renovating

You are being told you need a rating and nobody has explained why. We tell you what your town actually requires, what it costs, and what rebates you can claim before the work starts.

Additions & Gut Jobs
Start Here

Tell us where the project stands. We will work back from there.

Send us the address and the stage the job is at. We will tell you which code your town is on, what testing it needs and what it costs, at no charge.

Free quote, no obligation
Same day response

Cape Cod, Greater Boston, and surrounding Massachusetts communities • Monday to Friday, 7am to 6pm